Get ready for 3D in PCB Design!

ODBPP-XVL_title.png

Can you answer to the following questions right away on the PCB design below?

[Q1.] Point out the areas which may cause problems for assembly or manufacturing.
[Q2.] Point out the critical distances to be checked in a design review.
[Q3.] How long does it take to prepare a 3D illustration of this PCB?
ODBPP-XVL_sheet.png

You will see the answers in the video here under. (00:02:13)


The Ultra-Light format "XVL" unlocks the real benefits of 3D

There are various merits for using 3D viewing in the PCB engineering process. However, it is still not common practice for people to use 3D viewing in the PCB designing process today.
3D images of a PCB are often required for various manuals and other documentation as well as in the design and verification process. This can be very inefficient if those illustrations are reproduced separately by the designers themselves or someone else.

There are intermediate formats, such as IDF and DXF, that can be used for inputting PCB data into a 3D-CAD system. Not only do they require a special skill to operate, the time and effort required for brining in complex forms with large data sets can be quite significant.

This FREE DOWNLOADABLE "ODB++XVL Converter" can generate easy to use, ultra-light 3D data (XVL) directly from ODB++ formatted PCB design data. ODB++ is supported by most of the PCB-CAD tools used today. This allows you to use the 3D-PCB data from the initial board design for electro-mechanical verification, design review, digital mock-ups, and other down stream processes without frustration.

The "ODB++XVL converter" brings you the next-generation PCB design and manufacturing environment.

Download now


The combination of ODB++ and XVL maximizes the usability

You can generate a 3D model of a PCB easily from the ODB++ data outputted from PCB-CAD.

ODBPP-XVL_brief.png
About ODB++
It is an open data format for transmitting information to a manufacturing process from the design process of PCB.
ODB++ contains component's height and other attributes, which are not maintained in the Gerber format. This allows different checks for manufacturability beyond placement information for manufacturing equipment.
Main PCB-CAD which can output ODB++ (Altium)Altium Designer , Protel
(Cadence) Allegro PCB Design , OrCAD PCB
(Mentor) Expedition , Board Station , PADS
(Zuken)CR-5000 , CR-8000 , CADStar
To ODB++ Solution Alliance
About XVL
It is an "ultra-light" and "highly precise" 3D data format.
XVL is the most lightweight 3D format in the industry. It is used by thousands of companies enabling rapid communication, production and collaboration leveraging 3D throughout the manufacturing supply chain. With the free viewer tool running on a browser, in office software, on a tablet computer, etc. everyone is able to view the 3D data regardless of the time and the location.
ODBPP-XVL_xvl.png
To Lattice Technology , Inc

Data size comparison

Object PCBCAD 3DCAD XVL
ODBPP-XVL_dataSize1.png
Parts count:153
Pin-pairs count:710
1.4MB 50.1MB 0.5MB
ODBPP-XVL_dataSize2.png
Parts count:769
Pin-pairs count:2775
9.3MB 546.0MB 3.1MB

Application examples

Intuitive and smooth communication
With the use of 3D-PCB data, an intuitive understanding of the data greatly increases the efficiency of communication when compared to using 2D-PCB data and drawings. Everyone, in any group, is able to view the 3D-PCB thanks to the free downloadable viewer.
ODBPP-XVL_example1.png

Electro-Mechanical verification
XVL Studio Z(*1) is an optional electro-mechanical design review solution. With XVL Studio Z, you can use various features for 3D digital mock-up as shown below. 3D mechanical CAD data can be imported to XVL Studio Z through the converter(*2).

ODBPP-XVL_example2.png
Interference check
ODBPP-XVL_example2.png
Electrical clearnace verification
ODBPP-XVL_example2.png
Electrostatic verification

 

At post-design processes
"XVL Studio series" is an edit tool which creates process animation and technical documents. Using the 3D-PCB data generated from ODB++, the creation of documentation for production assembly is done quickly with very high quality.

ODBPP-XVL_example2.png
Process animation
ODBPP-XVL_example2.png
Work instructions
ODBPP-XVL_example2.png
Illustrations

 

*1 You can see the details of XVL Studio Z from here.

ZUKEN released BD-XVL Converter for changing ZUKEN PCB-CAD (CR-5000/Board Designer) into XVL, and XVL Studio Z in 2010. There are many companies now using XVL Studio Z.

*2 A separate converter is required to convert 3D-CAD data into XVL format.

XVL Converter is able to concert most 3D-CAD systems data
SolidWorks , Inventor , Creo , CATIA , NX , I-DEAS , SolidEdge , iCAD/SX , etc.

 

For more information on XVL products, please contact us.
oxc-global@zuken.co.jp


System Requirements

ODB++ XVL Converter runs on Windows. The system requirements are as follows.

OS ・Windows XP Professional SP2~
・Windows XP Professional x64 SP2
・Windows Vista Ultimate/Enterprise/Business 32bit SP1~
・Windows 7 Ultimate/Enterprise/Professional/Home Premium 32bit
・Windows 7 Ultimate/Enterprise/Professional/Home Premium 64bit
・Windows 8 Pro/Enterprise 32bit
・Windows 8 Pro/Enterprise 64bit
CPU 1GHz or more
Memory 1GB or more *2GB or more is recommended
HDD 100MB or more *The above is a space area required for installation
Display 1024 x 768 or more
ODB++ Based on ODB++Ver.7.0(*)

* The version check method of ODB++ data.

The following statements required in the file: "info" in folder [job_name] \misc\ of ODB++.
ODB_VERSION_MAJOR=7


Download ODB++ XVL Converter

Please be sure to confirm the following "SOFTWARE LICENSE AGREEMENT" before download.

 

SOFTWARE LICENSE AGREEMENT

PLEASE READ CAREFULLY the contents of this Agreement BEFORE DOWNLOADING and PROCEEDING to use Software (hereinafter defined below) provided on the website ePartFinder (hereinafter "ePartFinder") that Zuken Inc. (hereinafter "Zuken") operates

This Agreement is a legal document governing the use of Software by you, either an individual or a corporate entity (hereinafter called 'You') and will be entered into between You and Zuken.

By downloading, installing and/or using Software, You will be deemed to have accepted the full terms of this Agreement. If You do not accept any term of this Agreement, You must NOT download, install and/or use the Software.

Article 1 (Definition)
Software means machine-readable software program, data, font, file, library (collectively "Programs") provided on the ePartFinder, in whole or part, including its renewal version and any associated documentation such as manuals, (including electronic documentation), associated reference and printed materials.

Article 2 (Grant of right)
Subject to the terms of this Agreement, Zuken grants You a non-exclusive and non-transferable right to use the Software for your own use only on the CAD/CAM system provided by Zuken.

Article 3 (Restrictions)
1. You may NOT do any of the following:
(1) sub-license, assign, transfer, sell, rent, lease, furnish as collateral or share use of the Software;
(2) reproduce, modify, or create derivative of the Software; or
(3) disassemble, decompile, or reverse-engineer the Software in any means.
2. You agree and acknowledge that You may NOT use beyond the scope of internal purposes, disclose, transfer or assign to a third party including Your affiliates and subcontractors ("Third Party"), or grant a Third Party a right to use a software program which You have developed, that either was developed using this Software, or that uses any parts of this Software without Zuken's prior written consent.
3. If You do any of the acts prohibited above, either directly or through a Third Party, which results in damage being suffered by Zuken, You agree You will pay compensation to Zuken by itself or jointly and severally with the Third Party, and indemnify Zuken against all losses suffered and costs incurred by Zuken.

Article 4 (Intellectual property rights)
Intellectual property rights including, without limitation, copyright, patent, trade mark, know-how, trade secret relating to the Software shall belong to Zuken or its licensors. You will not own or retain any rights other than the right to use the Software in accordance with this Agreement.

Article 5 (No liability)
You acknowledge that you will use the Software on Your own responsibility. Zuken will not be liable to You or any third party for any damages arising from the use of Software under this Agreement.

Article 6 (Disclaimer)
Zuken disclaims any warranty, express or implied, that the Software is free of defects, and all express or implied warranties of merchantability, fitness for a particular purpose, and non- infringement upon any third party's intellectual property right in connection with the Software. You agree and acknowledge that Zuken has no obligation to correct any defect or otherwise maintain the Software for any reason whatsoever.

Article 7 (Confidentiality)
You must keep in confidence any contents of Software and this Agreement and must not disclose or leak out to any third party.

Article 8 (Termination)
Zuken may terminate this Agreement, and/or claim against You for compensation if any of the following acts or omissions occur:
(1) You breach any term of this Agreement;
(2) You do any act infringing Zuken's rights under Article 4 of this Agreement;
(3) You receive a suspension of transaction from a financial institution, or there is any other suspended payment which is an actual or potential cause of bankruptcy;
(4) Any application for liquidation, corporate reorganization, bankruptcy, or corporate rehabilitation is made against You;
(5) You receive from a third party a seizure, compulsory execution, or preventive maintenance order et al;
(6) You pass a resolution in favor of dissolution, merger, spin-off or divestiture, assignment of business, or any other corporate reorganization;
(7) A majority of voting rights or share in the securities of the whole shareholders of You makes a change;
(8) You receive from the applicable authorities cancellation or suspension of business permit et al, so that Zuken considers that Your performance of this Agreement is difficult;
(9) Zuken considers that there is a reasonable ground for terminating this Agreement.

Article 9 (Export restrictions)
If You export or proffer to export Software, You shall comply with related legislation of Japanese government and applicable foreign governments in respect of security trade control (hereinafter "Export Related Legislation") and shall not provide technical information in violation of Export Related Legislation. You shall not use or let a third party use Provided Information for the purpose that prevents international peace and security, nor shall You provide Provided Information for any person who has such purpose again.

Article 10 (Surviving terms)
Articles 3, 4, 5, 6, 7, 10 and 11 will survive the termination of this Agreement.

Article 11 (Governing law)
This Agreement is governed by and construed in accordance with the laws of Japan. The parties must submit to the exclusive jurisdiction of the Tokyo District Court of Japan with respect to any dispute arising in relation to this Agreement.

Article 12 (General terms)
This Agreement constitutes the complete agreement between the parties and supersedes all prior or contemporaneous agreement. In the event that any term of this Agreement is found to be invalid, unenforceable or illegal, the remainder of this Agreement will remain in full force and effect. Failure by either party to enforce any term of this Agreement will not be deemed a waiver of future enforcement of that or any other term, and no waiver of one breach will constitute a waiver of subsequent breaches of the same or of a different nature.


 

In order for you to progress to the questionnaire page, the member registration for ePartFinder is required. For those who are not members of ePartFinder, please register here.

btn_join.gif

Contact

Inquiries to ODB + + XVL Converter, please contact the following.

ZUKEN Inc.
E-mail: oxc-global@zuken.co.jp